Halogen Free 4 Core Low Voltage Power Cable Fire Resistant For Public Buildings

Halogen Free 4 Core Low Voltage Power Cable Fire Resistant For Public Buildings

Technical data

• Special insulation for cores and outer sheath adapted to DIN VDE 0815.
• Loop resistance

max. 73,2 Ohm/km

• Temperature range flexing -5°C to +50°C

fixed installation -30°C to +70°C

• Operating peakvoltage

max. 225 V (not for purposes of high current and power installation)

• Test voltage core/core 500 V core/screen 2000 V

Cable structure

• Bare copper-conductor, single-wire
• Core insulation of cross-linked polymer, compound type HI1 with mica tape, flame retardant

Core identification with colour rings and ring-groups to DIN VDE 0815

• Cores twisted to pairs, each 4 pairs consist to unit, several units stranded to layers
• Units identified with numbered tape
• Glass-fibre taped
• Screening with alu-laminated polyester tape

• Flame test acc. to

DIN VDE 0482-332-3, BS 4066 part 3,

DIN EN 60332-3, IEC 60332-3 (previously

DIN VDE 0472 part 804 test method C)

• Corrosiveness of combustion gases acc. to DIN VDE 0482 part 267,

DIN EN 50267-2-2, IEC 60754-2

(equivalent DIN VDE 0472 part 813)

• Smoke density acc. to DIN VDE 0482 part 1034-1+2, DIN EN 61034-1+2,

IEC 61034-1+2, BS 7622 part 1+2

(previously DIN VDE 0472 part 816)

Properties

• No fire propagation
• Low smoke density
• Not for purposes of high current and power installation as well as underground laying

• E 90: Functionality of electrical cable systems for minimum 90 minutes. Test method to DIN 4102 part 12.

The functionality for 90 minutes assures the functional performance of

water-pressure-rising stations for the supply to avoid smoke and heat in

safety-stairs and inner rooms, ladder shafts and engine rooms for fire brigade lifts, emergency lifts for sickbeds in hospitals and the fire brigade lifts.

Note

• E 30 to E 90

Functionality is dependant on installation technique.

Application

Wherever necessary to prevent high property value in case of fire damage to human and material. The static screen prevents strong interference impulse. Suitable for fixed installation everywhere, where in case of fire human life and material assets are to be protected and a safety conciousness take a special significance, e. g. in industrial complexes, public buildings, hotels, airports, under ground railway networks, hospitals.

CE= The product is conformed with the EC Low-Voltage Directive 2006/95/EC.

low voltage armored cable

low voltage electrical cable

Halogen Free 4 Core Low Voltage Power Cable Fire Resistant For Public Buildings Images